taber

Home

TABER 회전식 내마모 시험기

Model 5135(Single Head)/5155(DualHead)

Model 5155 Dual Head

광범위한 재질의 마모시험기! 세계표준!

러버,플라스틱,섬유,가죽,금속,스틸,세라믹,필름,코팅,페인트,글라스,Wood등의 다양한 재질은

Taber사에서 개발된 다양한 마모Wheel에 의하여 내마모 시험 평가 가능.

Model 5135 Purchase Content Wheel의 다양한 종류

제품명

Taber Rotary Abrasion Tester Model 5135/5155

제품정보

This high quality Taber Abrasion Tester for evaluating resistance to abrasion of a wide variety of materials through the measure of volumetric loss of a specimen exposed to the action of a normalized abrasive medium secured to a rotating disc.

The Model 5135 and 5155 is manufactured according to the specifications and requirements set forth in ASTM D3884 and D4060, additionally following standard test tables are availables.

This Taber Abrasion Tester features the rotation of the test specimen while it is in contact with the rotating disk. This assures uniform contact of the test specimen to the abrasion medium and provides more reliable, accurate and meaningful test determinations.

The Model HT8360 includes 250 g, 500 g and 1 kg reference weights. This “bench top” tester features highly automated “test cycling”, is equipped with conveniently mounted instrument controls and a highly reliable motor/drive assembly. Optional abrasive wheels, for testing versatility, and a vacuum cleaner are available.

Taber Abrasion Tester: Specifications

Abrasive Disk:	120 OD x 6.5 ID x 3 mm (4.72 x 0.26 x 0.12 in~)
Abrasive Media:	Paint (#CS10; #CS17) Tile (#CS17) Wood (#S32; #S33) Plastic (#CS17; #H18; #H19)
Specimen Size:	51 mm Ø x 13 mm (2 x 0.5 in~)
Specimen Loading:	0.25; 0.5; 1.0 kg
Counter:	6 Digit Electronic
Power Required:	110 VAC or 220 VAC
Motor:	1/8 HP
Disk Rotation:	60 and 70 RPM; 2 Stage
Dimensions (LxWxH):	350x350x300 mm (13¾x13¾x11¾ in~)
Net Weight:	30 kg (~66 lb)

Taber Abrasion Tester: Abrasive Media Selection

회전식 마모시험 Wheel의 다양한 종류

Taber Grinding Wheels are available in many levels of abrasiveness to suit a wide range of material testing applications. Wool felt or rubber wheels are used to test delicate materials such as dental powders. Wheels of abrasive particles in a matrix of rubber or vitrified clay are used for less delicate materials.

Taber Number	Composition	Load Range (g)	Abrasive Action	Servicing
CS10	Rubber and Abrasive Grain	500–1000	Mild	Reface w/ S–11 Disk
CS10F	Rubber and Abrasive Grain	250–500	Very Mild	Reface w/ S–11 Disk
CS17	Rubber and Abrasive Grain	500–1000	Harsh	Reface w/ S–11 Disk
H10	Vitrified Clay and Abrasive Grain	500–1000	Coarse	Reface w/ 200 Refacer
H18	Vitrified Clay and Abrasive Grain	500–1000	Medium Coarse	Reface w/ 200 Refacer
H22	Vitrified Clay and Abrasive Grain	500–1000	Very Coarse	Reface w/ 200 Refacer
H38	Vitrified Clay and Abrasive Grain	250 500 1000	Very Fine Hard	Reface w/ 200 Refacer & point tool
S–32 CS–0	Non–Abrasive Rubber	250 500 1000	Very Mild	No Refacing Required
S–42	Abrasive Paper	500–1000	Medium	Replace as Required
CS–5	Wool Felt	250–500	None	Replace as Required
S–35	Tungsten Carbide	500–1000	Severe	Clean as Required
S–39	Leather	500–1000	Mild used w/ #155 grit feeder	Replace as Required

세계표준시험규격-Taber Model 5135/5155 회적식 마모시험기로 시험등재됨.

AENOR	UNE 53-173-92 Part 2	Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties
AENOR	UNE EN 13672	Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf
AENOR	UNE EN 14431	Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture
AENOR	UNE EN 14864	Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification
AENOR	UNE 57095	Paper and cardboard - Determination of Resistance to Abrasion - Taber Method
AENOR	UN EN 438-2	Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties
AENOR	UN EN 13329:E	Laminate floor Coverings - Specifications, Requirements and Test Methods
AENOR	UN EN 13696	Wood and Parquet Flooring - Determination of Elasticity and Resistance to Wear
AFNOR	FD ENV 13696	Wood and Parquet Flooring - Determination of Elasticity and Resistance to Wear
AFNOR	NF B 51-282	Melamine Faced Particleboards - Determination of Resistance to Abrasion
AFNOR	NF EN 13672	Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf
AFNOR	NF EN 14431	Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture
AFNOR	NF EN 14864	Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification
AFNOR	NF G 37-121	Rubber or Plastic Coated Fabric-Determination of the Wear Resistance by Rubbing with two Abrasive Wheels
AFNOR	NF Q 03-055	Paper and Board Tests - Determination of Abrasion Resistance of Paper and Board (by Taber Method)
AFNOR	NF T 30-015	Paints and Varnishes - Abrasion Resistance Test
AFNOR	NF EN 438-2	Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties
AFNOR	NF EN 660-2	Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber Test
AFNOR	NF EN ISO 5470-1	Rubber or Plastics Coated Fabric-Determination of Abrasion Resistance
ANSI	INCITS 322-2002	Card Durability Test Methods
ANSI/NSF	35	High Pressure Decorative Laminates for Surfacing Food Service Equipment
ANSI/NSF	49	Class II (Laminar Flow) Biohazard Cabinetry
ANSI/NSF	51	Food Equipment Materials
ANSI/SAE	Z26.1-1996	Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment
AS	AS 2001.2.28	Methods of Test for Textiles
AS	AS/NZS 1580.403.2	Paints and Related Materials - Methods of Test
AS	AS/NZS 4266.2	Reconstituted wood-based panels - Methods of Test - Determination of resistance to surface abrasion (Taber abrasion test)
ASTM	C501	Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
ASTM	C1353	Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM	D1044	Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
ASTM	D3389	Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Double-Head Abrader)
ASTM	D3451	Standard Practices for Testing Polymeric Powders and Powder Coatings
ASTM	D3730	Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
ASTM	D3884	Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
ASTM	D4060	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM	D4685	Standard Test Method for Pile Retention of Corduroy Fabrics
ASTM	D4712	Standard Guide for Testing Industrial Water-Reducible Coatings
ASTM	D5144	Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
ASTM	D5146	Standard Guide to Testing Solvent-Borne Architectural Coatings
ASTM	D5324	Standard Guide for Testing Water-Borne Architectural Coatings
ASTM	D6037	Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
ASTM	D7255	Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method)
ASTM	F362	Standard Test Method for Determining the Erasability of Inked Ribbons
ASTM	F510	Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
ASTM	F1478	Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
ASTM	F1978	Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
BSI	BS 3900	Paints and Varnishes; Determination of Resistance to Abrasion
BSI	BS DD ENV 13696	Wood and Parquet Flooring - Determination of Elasticity and Resistance to Wear
BSI	BS EN 13672	Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf