PAT MICRO adhesion testing is designed for testing in confined areas, particularly on small components of irregular and awkward shapes.

Testing coatings and bond strength on fragile or thin substrates and components where the overall pull force must be strictly limited.

Description 

Portable and simple to use. 

Produces comparable test results both in the laboratory and on site.

Precision gauge with both MPa (N/mm²) and p.s.i. reading.

Simple layout of control panel.

Rate of tensile force increase is infinitely variable between zero MPa/sec (standstill) up to maximum rate (the rate depends on the size test element used).

110/230V mains power.  Battery power is an optional extra.

All AT101 adhesion testing machine models can have the data logging module built in when new or retro-fitted into existing units.

Testing of coatings on any shaped substrates, e.g. inside and outside pipe surfaces. 

Supplied in solid aluminium case.

  TESTING RANGE

Test element size (diameter mm)

Full Scale

Certified testing range

MPa

psi

MPa

psi

2.3

160

23200

136

19700

4

80

11600

68

9800

5.7

40

5800

34

4900

TECHNICAL DATA

Maximum certified pull force

 850 N

Accuracy

±1% of full scale

Power

110/230V AC 

Battery

Optional 

Hydraulic System Drive

Two-step servo motor 

Weight complete in case

8.2 kg

Case Dimensions (WxLxH)

430 x 325 x 145mm / 17x13x6 inches

Complies with:

ISO 4924, EN24624, ASTM D4541, etc.

INCLUDED WITH STANDARD MODEL

   Automatic hydraulic pump unit with control display
   Hydraulic cable
   PAT testing head 1kN  
   Adaptor for mains power
   Aluminium carry-case with protective interior
   Calibration Certificate