Home









 

   한 미 산 업 

전화 :  02 - 3411 - 0173

  팩스 :  02 - 3411 - 0178  
sales@gohanmi.com

PAT adhesion tester
AT101/80kN

 

The most powerful of all the adhesion testers in the PAT range, model AT101E/80kN is designed particularly for tensile adhesion testing of the strongest thermal sprayed coatings (e.g. arc, plasma and HVOF sprayed).  With the Ø25mm (1 inch) test cylinders the certified testing range is 136 MPa/19700 psi which is higher than the tensile strength of the strongest heat-curing adhesive (used for gluing the test elements).

Pull off testing is done in two ways:

1

In accordance with ASTM-C633 (two cylinders glued together) (ASTM-jig is an optional accessory). 

PAT portable hydraulic adhesion pull off tester for high strength metallized and thermal sprayed coatings to ASTM C633 standard

2

Pull testing directly on the coated component or on test panels

PAT test machine for measuring adhesion and bond strength of thermal sprayed coatings. Pull off testing directly on test panels

In addition this adhesion testing machine is used for tensile testing of various materials where strain measurements are not required. 

Different test ranges are achieved by using different test element sizes (see table below).   

 

DFD Instrument tensile adhesion test machine for bond and adhesion testing of strong coatings to ASTM C633, ISO 4624, ASTM D4541, DIN 53232

 

 

 

Description 

 

Portable and simple to use. 

 

Produces comparable test results both in the laboratory and on site.

 

Precision gauge with both MPa (N/mm2) and p.s.i. reading.

 

Simple layout of control panel.

 

Rate of tensile force increase is infinitely variable between zero MPa/sec (standstill) up to maximum rate (the rate depends on the size test element used).

 

110/230V mains power.  Battery power is an optional extra.

 

All AT101 adhesion testing machine models can have the data logging module built in when new or retro-fitted into existing units.

 

Testing of coatings on any shaped substrates, e.g. inside and outside pipe surfaces. 

 

Supplied in solid aluminium case.

  TESTING RANGE

 

Test element size (diameter mm)

Full Scale

Certified testing range

 

MPa

psi

MPa

psi

 

70.7

20

2900

17

2400

 

50

40

7200

34

4900

 

25

160

23200

136

19700

 

 

TECHNICAL DATA

Maximum certified pull force

 68 kN

Accuracy

±1% of full scale

Power

110/230V AC 

Battery

Optional 

Hydraulic System Drive

Two-step servo motor 

Weight complete in case

8.2 kg

Case Dimensions (WxLxH)

430 x 325 x 145mm / 17x13x6 inches

Complies with:

ISO 4924, EN24624, ASTM D4541, etc.

 

INCLUDED WITH STANDARD MODEL

  Automatic hydraulic pump unit with control display
  Hydraulic cable
  PAT testing head 40kN  
  Adaptor for mains power
  Aluminium carry-case with protective interior
  Calibration Certificate

 

   

 한미산업 

전화 :  02 - 3411- 0173    팩스 :  02 - 3411 - 0178 

sales@gohanmi.com

2001-2005 Hanmi Industries Ltd. All rights reserved
sales@gohanmi.com