1

Tensile adhesion testing of thermal sprayed coatings using Ø25mm (1 inch) test cylinders either on test panels or two cylinders glued together (ASTM-C633) ASTM-jig is an optional accessory.

2

Accurate measurement of tensile strength of concrete products with a choice of either the Ø50mm or Ø70mm test cylinder sizes.  This model is also used for testing cement based tile adhesives using the 50x50mm square test element. 

Description 

Portable and simple to use. 

Produces comparable test results both in the laboratory and on site.

Precision gauge with both MPa (N/mm²) and p.s.i. reading.

Simple layout of control panel.

Rate of tensile force increase is infinitely variable between zero MPa/sec (standstill) up to maximum rate (the rate depends on the size test element used).

110/230V mains power.  Battery power is an optional extra.

All AT101 adhesion testing machine models can have the data logging module built in when new or retro-fitted into existing units.

Testing of coatings on any shaped substrates, e.g. inside and outside pipe surfaces. 

Supplied in solid aluminium case.

  TESTING RANGE

Test element size (diameter mm)

Full Scale

Certified testing range

MPa

psi

MPa

psi

70.7

10

1450

8.5

1230

50

20

2900

17

2400

25

80

11600

68

9800

50 x 50mm

15.7

2270

13.3

1930

TECHNICAL DATA

Maximum certified pull force

 34 kN

Accuracy

±1% of full scale

Power

110/230V AC 

Battery

Optional 

Hydraulic System Drive

Two-step servo motor 

Weight complete in case

8.2 kg

Case Dimensions (WxLxH)

430 x 325 x 145mm / 17x13x6 inches

Complies with:

ISO 4924, EN24624, ASTM D4541, etc.

INCLUDED WITH STANDARD MODEL

  Automatic hydraulic pump unit with control display
  Hydraulic cable
  PAT testing head 40kN  
  Adaptor for mains power
  Aluminium carry-case with protective interior
  Calibration Certificate